The USB Fingerprint Mifare Card Reader/Writer combines a fingerprint scanner and an ISO14443A compatible Mifare card Reader/Writer into one device.
It is a standalone fingerprint matcher and can do “Match on Device”. Under the control of PC via USB interface, it captures a fingerprint image, extracts the minutiae (fingerprint characteristics) and then stores to its internal memory. The stored fingerprint can be used to match with a freshly captured fingerprint and matching result is sent to PC for authentication. Its internal memory can store up 100 fingerprints.
It can handle ISO14443A compatible Mifare card and has all the necessary card function such as format card, issue card, read card, write card, copy card, erase card, etc. So it can be used as a standalone USB Mifare card Reader/Writer. It supports both 1KB and 4KB Mifare card.
With a combination of fingerprint “Match on Device” and ISO14443A Mifare card Reader/Writer, The scanner is perfect for real two-factors authentication, what you own(finger) is matched with what you carry(Mifare card). It is because fingerprint data can be stored to Mifare card and at the time of authentication:
1. User shows the Mifare card and FS25 read the fingerprint data stored in card.
2. Then put finger and FS25 scans the fingerprint image.
3. FS25 matches the scanned fingerprint with the fingerprint data read from the Mifare card.
4. The matching result is sent to PC for authentication
Specification
USB 2.0 compatible interface, plug and play device
Support WinXP and Vista
With a 2 meter standard USB cable
Size, 50 x 73 x 35 mm
Weight, 200 gram
Operation temperature: -10 to +55 Degree Celsius
Supply voltage: DC 4.5-5.5V via USB port
Power consumption: active <180mA and standby <80mA
ESD contact - 8KV and air discharge -16KV, no permanent damage
-Fingerprint
Fingerprint scanning window size is 16x24mm
Image resolution is 480x320 pixel, 500 DPI
8 bit grey level
Light source: Infrared LED
Raw fingerprint image file size is 150K byte
With Live Finger Detection (LFD) feature
Can store a maximum of 100 fingerprints
FAR=0.000001 and FRR=0.01
-Mifare card reader/writer
Compliant with ISO14443A
Carrier frequency: 13.56MHz
Support standard Mifare key encryption
Support both 1KB and 4KB Mifare card
Card sensing range: 15mm
Card read/write time: <0.5sec(also depends on the data size)
Two colors LED for Mifare card reader/writer status indication